Interface Mini Load Cells
29 April, 2024 | AMS Instrumentation & Calibration Pty LtdInterface recognises the need for miniature load cells and offers a wide range of products which have been engineered for use in applications that require a light touch, are lightweight or require less space.
FCI ST100A Flow Meter for biogas measurement
23 April, 2024 | AMS Instrumentation & Calibration Pty LtdFeaturing a rugged thermal dispersion flow sensor, the ST100A Flow Meter from Fluid Components International (FCI) eliminates wet gas and entrained moisture issues affecting biogas measurement accuracy.
NOSHOK measurement solutions
15 March, 2024 | AMS Instrumentation & Calibration Pty LtdNOSHOK's measurement solutions are suitable for a wide variety of industries, including oil and gas, fluid power, general industrial, automation, chemical processing, manufacturing, water and wastewater, food and beverage, and many more.
FCI ST75 series flow meter
08 March, 2024 | AMS Instrumentation & Calibration Pty LtdThe meter senses slight changes in flow, making it suitable for detecting fugitive methane emissions.
Hawker Electronics FLEXICAP variable capacitance systems
14 November, 2023 | AMS Instrumentation & Calibration Pty LtdWhere liquids are non-conducting or where there are free-flowing powders, Hawker Electronics can offer a capacitance detection system that detects the presence of the media to be monitored.
FCI FS10i series compressed air flow meters
01 November, 2023 | AMS Instrumentation & Calibration Pty LtdThe compact FS10i flow meter series is an easy-to-install solution to measure the flow rate of compressed air, air and natural gas.
FCI FS10A Analyzer Flow Switch/Monitor
08 September, 2023 | AMS Instrumentation & Calibration Pty LtdFluid Components International's FS10A Analyzer Flow Switch/Monitor is a sophisticated universal flow switch and monitor specifically designed for gas and liquid process analyser sampling systems.
Michell Instruments CDP301 portable hydrocarbon and water dewpoint analyser
01 August, 2023 | AMS Instrumentation & Calibration Pty LtdMichell Instruments' CDP301 is useful for quality control in natural gas processing and transmission, as a manual-visual dewpoint instrument that uses the chilled mirror technique for measurement of both hydrocarbon and water dewpoint.
Noshok diaphragm seals
10 May, 2023 | AMS Instrumentation & Calibration Pty LtdNoshok provides a wide range of standard, elevated pressure and reduced pressure replaceable and non-replaceable diaphragm seals.
FCI ST50 air and compressed air flow meter
03 May, 2023 | AMS Instrumentation & Calibration Pty LtdFCI's ST50 is a compact device for repeatable flow rate measurement of air, compressed air or nitrogen.
Michell Instruments MDM300 and MDM300 I.S. dewpoint hygrometers
01 May, 2023 | AMS Instrumentation & Calibration Pty LtdMichell Instruments' MDM300 is a high-speed, portable dewpoint hygrometer, offering rapid spot-check measurements of dewpoint or moisture content in many applications, including compressed air, natural gas and high-voltage switchgear quench gas.
FCI ST75 air/gas flow meter
27 April, 2023 | AMS Instrumentation & Calibration Pty LtdFCI's compact ST75 air/gas flow meter is suitable for optimising natural gas flow control for industrial ovens, heat chambers and furnaces to reduce process and plant fuel costs.
ECD OIW80 oil-in-water analyser
01 February, 2023 | AMS Instrumentation & Calibration Pty LtdThe intelligent analyser is designed to precisely measure oil over a wide range of 0 to 30 ppm (mg/L) and can be factory preconfigured to measure oil in multiple ranges or easily set in the field.
London Electronics INTUITIVE INT4 digital panel meter
01 December, 2022 | AMS Instrumentation & Calibration Pty LtdLondon Electronics panel meters are built to a high standard which conforms to ISO 9001:2015, and as such they can be expected to last for a considerable amount of time.
Fluid Components International FLT93C thermal flow switch
21 November, 2022 | AMS Instrumentation & Calibration Pty LtdThe FLT93C flow switch from Fluid Components International (FCI) provides liquid flow rate measurement for clean-in-place (CIP) system operational integrity.