Kurt J Lesker ALD 150LX atomic layer deposition system
03 August, 2011 byThe Kurt J Lesker ALD 150LX atomic layer deposition system can operate as a stand-alone or fully integrated cluster tool system. It is suitable for use in nanofabrication, microelectronics, optics, MEMS, semiconductor, photovoltaics, photonics, catalysis and fuel cells, wear resistance and OLED/organic electronics applications.
Kurt J Lesker NANO 36 thin film deposition system
03 August, 2011 byThe Kurt J Lesker NANO 36 thin film deposition system has been designed to accommodate most thermal evaporation processes and magnetron sputtering (including: RF, DC and pulsed DC). It is suitable for entry- to mid-level users in university, industrial and government R&D laboratories.
Mecmesin Vortex-xt torque tester
09 June, 2011 byA versatile touch-screen controlled torque tester, the Mecmesin Vortex-xt can be used to bring quality control measurement straight to the point of manufacture.
Lloyd Instruments LS1 single-column materials tester
12 April, 2011 byLloyd Instruments LS1 is a flexible, high-productivity single-column materials tester that is suitable for multiple applications. It features linear guide technology and advanced control software.
Lloyd Instruments TAPlus texture analyser
11 April, 2011 byThe Lloyd Instruments TAPlus texture analyser, combined with the Nexigen Plus texture analysis software, can be used to measure force, time and distance, enabling parameters such as adhesiveness, chewiness, fracturability, firmness, stringiness and other food processing parameters vital to some food’s characteristics to be calculated and quantified.
Mecmesin coefficient of friction (COF) tester
05 April, 2011 byThe Mecmesin coefficient of friction (COF) tester can be used to improve production methods and reduce wastage by assessing the ‘slip’ properties of plastic film, paper and packaging products.
Vibration Systems & Solutions EziPack 4 vibrating feeder
25 November, 2010 byIn addition to the regular EziPack vibrating feeder, Vibration Systems & Solutions has released the EziPack 4, a smaller version with a 4 L hopper and reduced tray size. The tray is still in a vee shape, but, with reduced cross-section, it offers exceptionally fine adjustment of feed rate. On recent tests the unit was capable of being controlled to give a mass increment of 0.0001 g.
Mecmesin MultiTest-xt test stand
07 October, 2010 byMecmesin has released a console driven test stand, the MultiTest-xt. This will be the first product for Mecmesin using touch-screen technology and will involve the development of software offering new and improved features including a much more intuitive user interface, the ability to save test routines which can then be run with only two button presses and load-holding capability.
Dwyer Instruments model SM-100 digital sound meter
07 October, 2010 byThe model SM-100 digital sound meter is suitable for measuring noise levels from 30 to 130 dB with accuracy of ±1.5 dB.
TecQuipment modular Structures teaching system
20 September, 2010The TecQuipment modular Structures teaching system range, available from Edutechnics/Duff and Macintosh, can be used for engineering teaching in tertiary laboratories.
Hart 9141 dry block calibrator
06 August, 2010 byThe Hart 9141 dry block calibrator is available to rent.
Mecmesin Advanced Force Gauge
06 August, 2010 byThe Mecmesin Advanced Force Gauge (AFG) is a versatile and fully featured digital force gauge that has been specifically designed to measure force in tension and compression (push or pull) with optimum precision and performance.
Particle Test penetrometer
07 June, 2010 byParticle Test has released a penetrometer that can be used to determine consistency and shear stability for design, quality control and identification purposes.
IDM Instruments B0012 crease bend tester
07 June, 2010 byThe B0012 crease bend tester for cardboard and corrugated cardboard is used to monitor scoring equipment to ensure box performance, by measuring the bending resistance of creased board at the time of folding at the crease. The maximum force required to bend the sample board is shown on the digital display.
ASM WS31 cable extension sensor series
30 March, 2010 byASM’s WS31 cable extension sensor series includes a mounting bracket for easy flexible installation of the sensor and thus position measurement in almost every direction.
