Environmentally friendly pipette
08 April, 2009 | Supplied by: DKSH Australia Pty Ltd
The Capp Ecopipette is a light, ergonomically designed pipette made from eco-friendly materials selected and constructed to provide a long life cycle.
Water activity meter
08 April, 2009 | Supplied by: Graintec Pty Ltd
The Aqualab Series 4 water activity meter features an intuitive menu navigation, easy-to-clean sensor area and data storage to provide high functionality and utility for operators.
Microcentrifuge
08 April, 2009 | Supplied by: Eppendorf South Pacific Pty Ltd
The 30-place microcentrifuge 5430 line provides a range of options, including eight different rotors, tubes from 0.2 to 50 mL, microtest plates, deepwell plates and slides.
Electroporation electrodes
08 April, 2009 | Supplied by: SDR Scientific
The Platinum Tweezertrode electrodes from BTX are designed to enhance in utero or in vivo transfection applications.
Sub-visible particle analyser
08 April, 2009 | Supplied by: Crea Laboratory Technologies Pty Ltd
The Pamas SVSS is a laboratory particle counter for the measurement of particulates in liquids. The counter can be used for many fluid applications where particle quantifying and particle size from 1 µm upwards is important.
Nanoparticle tracking
08 April, 2009 | Supplied by: Particle & Surface Sciences Pty Ltd
The Nanoparticle Tracking Analysis system from NanoSight Techology is based on laser light scattering microscopy. The instruments can visualise and dynamically size populations of particles in a liquid on an individual basis in the particle size range of 10-1000 nm, dependent on material.
Reagent reservoir
08 April, 2009 | Supplied by: Lomb Scientific (Aust) Pty Ltd
The V-shaped wells of the Scienceware 12 Channel Reagent Reservoir allow complete sample withdrawal and minimise the waste of reagents. Each channel holds up to 5 mL and is numbered to facilitate serial dilution.
OEM liquid handling robot
08 April, 2009 | Supplied by: Ai Scientific Pty Ltd
Tecan has developed the Cavro Omni Robot, a general-purpose OEM liquid handling robot for a wide range of applications within clinical diagnostic, life sciences and analytical chemistry.
Colour analyser
08 April, 2009 | Supplied by: IDM Instruments
The ColorQA is a colour comparison device that digitally measures the colour of a target and then allows the user to sample any number of comparison colours to determine a match.
Ohm meter
08 April, 2009 | Supplied by: Westek Electronics Pty Ltd
The KoCoS Promet 100 Precision Ohm meter is suited to tasks including earth bond and weld testing, as well as circuit breaker main contact testing. The device interfaces with the KoCoS range of ACTAS (Advanced Circuit Breaker Test and Analysis Systems) instrumentation.
Force tester
08 April, 2009 | Supplied by: Royce Water Technologies Pty Ltd
The Chatillon TCD225 force-testing system can be set up in seconds to perform a wide variety of tests. It allows users to perform singular or multi-variable testing without relying on a personal computer or complex software.
AC servomotors
08 April, 2009 | Supplied by: M Rutty & Co Pty Ltd
The Mavilor MA series of AC servomotors provides a short mechanical time constant suitable for control operations.
Adhesion slides
08 April, 2009 | Supplied by: Sapphire Bioscience
ImmunoSelect Adhesion Slides by Squarix Biotechnology feature a surface that immobilises cells and tissue sections and maintains a high retention of cell and tissue morphology. This helps to reduce the amount of cellular material and reagents required.
Stirring bar multi-pack
08 April, 2009 | Supplied by: VWR International Pty Ltd
The Spinpak Assortment with Spinbar Restrainer offers octagonal magnetic stirring bars in 12.5, 25.5, 38 and 51 mm lengths in either a 3.2 or 8 mm diameter.
Flow analysers
08 April, 2009 | Supplied by: ALPE Pty Ltd
The Futura flow analysers reach very low detection limits, while still extending the reporting ranges of results and speeding up the operation by reducing the number of dilutions.
