Laboratory labelling system
08 June, 2007 | Supplied by: http://www.bradyaust.com.au/
The latest addition to Brady's line of laboratory portable printing solutions is the LABXPERT Laboratory Labelling System.
Total suspended solids filters
09 May, 2007 | Supplied by: Ai Scientific Pty Ltd
Environmental Express ProWeigh filters are a time-saving, convenient and accurate way to test for total suspended solids (TSS). All the required filter preparation steps are eliminated.
Easy-to-use instrument controller for vacuum pressure measurements
09 May, 2007 | Supplied by: AVT Services Pty Limited
Leading vacuum pump manufacturer, BOC Edwards has launched two new versions of its Turbo Instrument Controller (TIC) which now allows operators to view data and program up to six vacuum gauges from one central controller.
Rheological testing pressure cells
09 May, 2007 | Supplied by: Metrohm Australia & New Zealand
Anton Paar has released a range of pressure cells as an accessory to the MCR Physica Rheometer Series.
Liquid handling/robotic workstation
04 April, 2007 | Supplied by: Ai Scientific Pty Ltd
The versatile Freedom EVO from Tecan is a series of liquid handling platforms and robotic workstations. The Freedom EVO platform delivers flexibility and possibilities for expansion according to future needs. Powered by an intuitive software, Freedom EVOware, each system is equipped to successfully automate genomic, proteomic, drug discovery, and other life science applications.
Pipetting in the extremes
04 April, 2007
To demonstrate the impact of environmental conditions on pipetted volumes, Artel has launched the Extreme Pipetting Expedition. During this multi-phase, year-long scientific study, Artel will visit locations with extreme ranges of laboratory conditions
Large-volume pipetting
12 March, 2007 | Supplied by: Interpath Services Pty Ltd
Made for large-volume pipetting, the Macro Ovation is designed to eliminate the discomfort and safety challenges commonly associated with the use of traditional serological or volumetric pipettes. A relaxed grip design, low weight and electronic operations make repetitive pipetting user friendly, even over prolonged periods.
Multi-sample homogeniser
07 February, 2007 | Supplied by: Lomb Scientific (Aust) Pty Ltd
The Omni Prep multi-sample homogeniser lets users set it and forget it as there is no need to hold a motor, watch the clock, clean the probes, hear the noise, or worry about sample loss or cross contamination.
Acid-resistant evaporators
12 January, 2007 | Supplied by: http://www.eutechinst.com/
Genevac offers a wide range of centrifugal evaporation systems designed to provide reliability, performance and resistance to the most common solvents and acids used within chemistry laboratories.
Overheating protection
12 January, 2007 | Supplied by: http://www.eutechinst.com/
Available as standard on HT Series II and Mega evaporation systems, SampleGuard temperature control can be used to protect samples from any possibility of overheating when evaporation is complete.
Calorimeter system
08 December, 2006 | Supplied by: http://www.scisol.com.au/
The CAL2k calorimeter system consists of: calorimeter, cooler, filling station and the vessel.
Inline turbidimeter
13 November, 2006 | Supplied by: http://www.johnmorris.com.au/
Sigrist's AquaScat WTM turbidimeter offers maintenance-free inline turbidity measurement. The WTM model features contactless measurement, using a 'free-falling' stream together with programmable, automatic calibration. The AquaScat WTM has a wide measuring range from 0 to 4000 FNU covering all applications - from highly turbid raw river water, to optimally filtered pure water with 0.015 FNU. For normal measurement there is no need for a de-aeration tank, as the WTM model has an electronic, built-in bubble trap. This feature is sufficient for occasional bubbles. With an integral display and operating panel the AquaScat is fast and easy to install.
Sterile disposable shaker flasks
13 November, 2006 | Supplied by: http://www.interpath.com.au
The Nalgene 2.8 L sterile disposable shaker flask provides scientists with the lightweight and economical features of Nalgene Erlenmeyer flasks in a larger volume capacity. Designed to reduce the risk of cross contamination, these flasks are suitable for shaker and suspension cell culture, media preparation and media storage.
Microplate fluid dispenser
13 November, 2006 | Supplied by: http://www.proteomass.com.au/
The UltraSpense 2000 bulk reagent dispenser from KD Scientific incorporates a 'no consumables' and 'no required calibration intervals' design that makes automated microplate dispensing affordable for more laboratories.
Laboratory labelling system
09 October, 2006 | Supplied by: http://www.bradyaust.com.au/
The latest addition to Brady's line of laboratory portable printing solutions is the Labxpert Laboratory Labelling System. The Labxpert printer reduces the time required to create labels while producing legible, durable, professional labels for lab samples at an affordable price.
