Lab equipment

Transportable incubators

09 March, 2009 | Supplied by: http://www.cryologic.com

CryoLogic is an Australian manufacturer of portable incubators used for transporting biological samples at a constant temperature from one facility to another.


Lab-on-a-chip can detect pollutants and disease

18 February, 2009

Researchers at Tel Aviv University have developed a lab-on-a-chip that uses genetically engineered bacteria to measure water quality in real time.


Vibro viscometer

09 February, 2009 | Supplied by: http://www.andmercury.com.au

The SV-A series Sine-wave vibro viscometer is a solution to the excessive use of expensive sample fluids during viscosity measurements.


Porosity tester

01 January, 2009 | Supplied by: IDM Instruments

The Foam Porosity Tester Digital is an instrument for monitoring the porosity of flexible cellular polyurethane, to determine the ease with which air passes through a cellular structure.


Magnetic stirrer

01 January, 2009 | Supplied by: John Morris Scientific Pty Ltd

The 2mag BioMixDrive range of magnetic stirrers is designed for careful and protective mixing of cell suspensions and culture media, and provide a stirring volume of up to 5 L.


Programmable dispensing systems

01 December, 2008 | Supplied by: STAUFF Corporation Pty Ltd

The PDS-100 from Fluid Metering Inc (FMI) is a programmable dispensing system which uses stepper motors to control a variety of valveless piston pumps.


Digital manometers

01 December, 2008 | Supplied by: Technical & Scientific Equipment

Keller has released the Leo 2 digital manometer, designed to handle demanding monitoring tasks in the plant and machinery manufacturing sector.


PT250 portable weighing scale

01 December, 2008 | Supplied by: Hi-Weigh Aust Pty Ltd

The PT250 portable weighing scale is suitable for use in most applications.


Non-contact temperature sensor

01 December, 2008 | Supplied by: Heastern Industries

The PyroEpsilon series non-contact temperature sensors measure the temperature of inaccessible or moving objects and materials. They can measure temperatures from -20 to +500 °C, accurately and consistently, with a response time of 240 ms.


Variable hypoxia workstation

01 December, 2008 | Supplied by: Don Whitley Scientific Australia

The Hypoxystation is designed for research requiring strictly maintained normoxic, hypoxic and anoxic conditions and is suitable for accurately controlling oxygen, CO2, temperature and humidity.


Environmental sample pre-treatment

01 December, 2008 | Supplied by: Waters Australia Pty Ltd

The Oasis HLB Disk is a solid-phase sample preparation product for the analysis of EPA Method 8270, endocrine disruptors, personal care products, pharmaceutical residues in surface water, and drinking water and other emerging contaminants.


Ergonomic pipettor

01 December, 2008 | Supplied by: John Morris Scientific Pty Ltd

The Gilson Pipetman Neo is an evolution of the Pipetman P that is designed to minimise repetitive strain injuries.


Mass flow controllers

01 December, 2008 | Supplied by: Duff & Macintosh

Alicat Scientific has launched a line of low flow (0.5 to 50 SCCM) mass flow controllers.


Chemistry vacuum pump

01 December, 2008 | Supplied by: John Morris Scientific Pty Ltd

The Vacuubrand PC 3001 Vario automatic chemistry vacuum pumping system offers chemistry diaphragm pump technology combined with a fully automated vacuum control system. Applications include rotary evaporation, vacuum concentration, vacuum drying, general distillations and filtration.


XDS35i vacuum pump

01 December, 2008 | Supplied by: AVT Services Pty Limited

The XDS35i vacuum pump is designed to provide a dry vacuum free of lubricants. There are no bearings, grease or oil under vacuum.


  • All content Copyright © 2026 Westwick-Farrow Pty Ltd